100mm Cutting Depth Capacity
250mm Throat Capacity
Retractable Blade Guard
Cast Iron Tilting Table
Powered by a Quiet Induction Motor
Quick Locking Rip Fence Included
Sliding Mitre Fence Included
Optional Floorstand Available
A medium sized bandsaw with a durable precision ground cast iron tilting table with a stop for returning to 90 degrees after a bevel cut and two mitre fence slots. The quick release fence locks onto both front and rear of the table to provide a rigid straight guide for ripping whilst the sliding mitre fence is adjustable for crosscutting at any angle.
The new rack & pinion blade guard design can be adjusted single handed using a dial on the side of the machine and is fitted with a scale to set the cutting height. Two side guide bearings and a rear thrust bearing on the end of the guard, control the blade and keep it true. Finished off with a durable powder coated paint.
Supplied with rip fence, mitre fence adjustable 60 degrees each way, 3/8" blade, NVR switch, 60mm diameter extraction outlet, cable and plug.
Maximum cutting depth 100mm
Throat width 250mm
Table size 340mm x 335mm
Table height (on optional floorstand) 900mm
Table tilt 0-45
Cutting speed 800m/min
Motor (induction) 375W
Blade length 1712mm
Blade widths 6mm - 12mm (1/4" - 1/2")
Dimensions (WxDxH) [on stand] 400mm x 520mm x 840mm [1540mm]
Weight 30Kg
